 |
|
|
|
Si5SDOI2-50V-2x16A
|
Manufacturer:
N/A
| | SKU: |
10062
|
Price: $139.00
|
Si5SDOI2-50V-2x16A is a Dual, 50V 2x16A Solenoid Driver with an integrated heat sink that uses two independent optically isolated digital control voltages VI1,G and VI2,G (0 to 15V) to turn two load-currents on or off. This board requires a single 6V to 50V DC power source (unregulated and unfiltered) at a 0A to 40A current range to operate normally with a wide range of inductive loads (coils or Solenoids). The digital control inputs are zener-diode protected and optically isolated from the power source Vp (with a breakdown voltage of 1000V) and each requires only 2mA input current at VIn,G=5V to fully turn on a load current. Each load current is off (zero) when its corresponding control voltage VIn,G is: 0< VIn,G<2.5V and the load current is on (max.) when 2.5V< VIn,G<15V. Snubbing circuits and filter capacitors are included to suppress inductive switching transients. Two onboard LEDs (Red and Green) are used to monitor the load-voltages and an optional. A small (2.3”x2.4”x0.95”) finned integrated heat sink is included with mounting hardware (as shown on the photograph) to operate at 2x16A or 1600W power levels.
E-mail a friend about this item.
Return to Catalog
|
