Si-NEW-Design The Si-NEW-Design is an additional cost due to NEW Software and NEW Hardware Design, based on an existing Signal Product, requested by a customer (via E-mail). This new design procedure requires a NEW PC board, NEW Hardware and NEW Software Design.
Price: $990.00
Si-New-Program The Si-New-Program is an additional cost due to New Software Development in a Current Signal Product, requested by a customer (via E-mail). This modification retains the same hardware, but requires New Program Development.
Price: $299.00
Si-Redesign The Si-Redesign is an additional cost due to extensive software and extensive hardware redesign of a Current Signal Product, requested by a customer (via E-mail). The redesign procedure requires a NEW PC board, Major hardware and Major software changes.
Price: $499.00
Si-Reprogram The Si-Reprogram is an additional cost due to software changes in a current Signal Product, requested by a customer (via E-mail). This modification retains the same hardware, and includes minor program change.
Price: $199.00
Motor and Temperature Controllers
Si18DiUdMTC1-50V The Si18DiUdMTC1-50V is a versatile, fully-programmed, microprocessor-based, proportional, Digital, Unidirectional, Motor and Temperature Controller board; capable of controlling two processes (temperature and DC motor-speed) simultaneously in a closed-loop or open-loop control mode. An optional 2 line by 20 characters long LCD (with HITACHI HD44780 Interface Standard) is used for Set-Temperature, Measured-Temperature, Set-RPM and Measured-RPM data display. Eight board mounted push-buttons are used for temperature and motor-mode control.
Price: $159.00
Si18HyUdMTC1-50V The Si18HyUdMTC1-50V is a versatile, fully-programmed, microprocessor-based, proportional, Hybrid, Unidirectional, Motor and Temperature Controller board; capable of controlling two processes (temperature and DC motor-speed) simultaneously in a closed-loop or open-loop control mode. An optional 2 line by 20 characters long LCD (with HITACHI HD44780 Interface Standard) is used for Set-Temperature, Measured-Temperature, Set-RPM and Measured-RPM data display.
Price: $149.00
Motor Controllers with LCD Port
Si14HyATMC1-50V-20A The Si14HyATMC1-50V-20A is a single, microprocessor based, Hybrid, Adjustable Ramp-Time, Unidirectional, Motor-Controller board that uses pulse-width modulation (PWM) to efficiently control the power flow (or motor speed) to a brush type DC motor, from 0 to 1000W in 8.33W steps. The motor acceleration deceleration is adjustable (using the Ramp-Time input) from 100ms to 25.6s in 100ms steps. An optional 2 line by 20 characters long LCD (with HITACHI HD44780 Interface Standard) is used for Set-RPM, Measured-RPM and Ramp-Time data display.
Price: $139.00
Si14HyUdMC1-50V The Si14HyUdMC1-50V-20A is a single, microprocessor based, Hybrid, Unidirectional, Motor-Controller board that uses pulse-width modulation (PWM) to efficiently control the power flow (or motor speed) to a brush type DC motor, from 0 to 1000W in 8.33W steps. An optional 2 line by 20 characters long LCD (with HITACHI HD44780 Interface Standard) is used for Set-RPM and Measured-RPM data display.
advanced search >> view cart >> checkout >> amount in cart: $0.00 
