Si5HyUdMCAF1-30V The Si5HyUdMCAF1-30V is a single, Hybrid, Closed-Loop, Unidirectional Motor-Speed Controller with one Analog (0 to 5V) Feedback Input for speed regulation; one Analog Input (0 to 5V) for Set-Speed adjustment; one 30V, 20A MOSFET Output; one 20kHz Pulse-Width Modulator (PWM) efficiently controlling the power flow to an isolated DC Load (or Motor) from 0 to 600W in 4W steps. The user can choose between slow or fast motor acceleration/deceleration modes by short-circuiting or open-circuiting the pins labeled J1M.
Price: $109.00
Si5HyUdMCAF1-30V-20A The Si5HyUdMCAF1-30V-20A is a 30V 20A, microprocessor based, Single, Hybrid, Closed-Loop, Unidirectional, Motor-Controller board with an Integrated Heat Sink and with an Analog Feedback Port. This board uses pulse-width modulation (PWM) to efficiently control the speed of a brush type DC motor (or load current) in open or closed loop control mode in the 0 to 600W power range, and in 5W steps. An onboard microprocessor generates a 5kHz or 20kHz PWM carrier signal, regulates the motor speed, controls motor the acceleration/deceleration, and monitors the sensor inputs. The PWM carrier frequency is user selectable by the jumper CN4, 20kHz when CN4 is open and 5kHz when short. The high frequency PWM rate provides a smooth motor-speed control, and insures a quiet motor environment.
Price: $109.00
Si5HyUdMCAF1-50V The Si5HyUdMCAF1-50V is a single, Hybrid, Closed-Loop, Unidirectional Motor-Speed Controller with one Analog (0 to 5V) Feedback Input for speed regulation; one Analog Input (0 to 5V) for Set-Speed adjustment; one 50V, 20A MOSFET Output; one 20kHz Pulse-Width Modulator (PWM) efficiently controlling the power flow to an isolated DC Load (or Motor) from 0 to 1000W in 6.6W steps. The user can choose between slow or fast motor acceleration/deceleration modes by short-circuiting or open-circuiting the pins labeled J1M.
Price: $119.00
Si5HyUdMCAF1-50V-20A The Si5HyUdMCAF1-50V-20A is a 50V 20A, microprocessor based, Single, Hybrid, Closed-Loop, Unidirectional, Motor-Controller board with an Integrated Heat Sink and with an Analog Feedback Port. This board uses pulse-width modulation (PWM) to efficiently control the speed of a brush type DC motor (or load current) in open or closed loop control mode in the 0 to 1000W power range, and in 8.3W steps. An onboard microprocessor generates a 5kHz or 20kHz PWM carrier signal, regulates the motor speed, controls motor the acceleration/deceleration, and monitors the sensor inputs.
Price: $119.00
Si5HyUdMCDF1-30V The Si5HyUdMCDF1-30V is a single, Hybrid, Closed-Loop, Unidirectional Motor-Speed Controller with one Digital (0 to 5V) Feedback Input for speed regulation; one Analog Input (0 to 5V) for Set-Speed adjustment; one 30V, 20A MOSFET Output; one 20kHz Pulse-Width Modulator (PWM) efficiently controlling the power flow to an isolated DC Load (or Motor) from 0 to 600W in 4W steps. The user can choose between slow or fast motor acceleration/deceleration modes by short-circuiting or open-circuiting the pins labeled J1M.
Price: $109.00
Si5HyUdMCDF1-30V-20A The Si5HyUdMCDF1-30V-20A is a 30V 20A, microprocessor based, Single, Closed-Loop, Hybrid, Unidirectional, Motor-Controller with an integrated heat sink and with a Digital Feedback port. This board uses pulse-width modulation (PWM) to efficiently control the speed of a brush type DC motor (or load current) in open or closed loop control mode in the 0 to 600W power range, and in 5W steps. The desired control mode is selected by a jumper (J1M). An open-circuit (no jumper) selects the open-loop mode, while short-circuit (jumper installed) selects the closed-loop mode. The desired motor speed (or load current) is set by a (0 to 5V) range external analog voltage (applied to I1 input pin on port CN4). The Si18V1RPM-Sens optical interrupter (connected to port CN3) along with Si18V1RPM-Wheel optical wheel (mounted on the motor shaft) provides proportional feedback, keeping the motor-shaft rotating at a constant speed. The speed-range is adjustable with an onboard 25-turn trim pot in the 50 to 3000 rpm range.
Price: $109.00
Si5HyUdMCDF1-50V The Si5HyUdMCDF1-50V is a single, Hybrid, Closed-Loop, Unidirectional Motor-Speed Controller with one Digital (0 to 5V) Feedback Input for speed regulation; one Analog Input (0 to 5V) for Set-Speed adjustment; one 50V, 20A MOSFET Output; one 20kHz Pulse-Width Modulator (PWM) efficiently controlling the power flow to an isolated DC Load (or Motor) from 0 to 1000W in 6.6W steps. The user can choose between slow or fast motor acceleration/deceleration modes by short-circuiting or open-circuiting the pins labeled J1M.
Price: $119.00
Si5HyUdMCDF1-50V-20A The Si5HyUdMCDF1-50V-20A is a 50V 20A, microprocessor based, Single, Closed-Loop, Hybrid, Unidirectional, Motor-Controller with an integrated heat sink and with a Digital Feedback port. This board uses pulse-width modulation (PWM) to efficiently control the speed of a brush type DC motor (or load current) in open or closed loop control mode in the 0 to 1000W power range, and in 8.3W steps. The desired motor speed (or load current) is set by a (0 to 5V) range external analog voltage (applied to I1 input pin on port CN4). The Si18V1RPM-Sens optical interrupter (connected to port CN3) along with Si18V1RPM-Wheel optical wheel (mounted on the motor shaft) provides proportional feedback, keeping the motor-shaft rotating at a constant speed. The speed-range is adjustable with an onboard 25-turn trim pot in the 50 to 3000 rpm range. Typical applications are: DC Motor-Speed Controller, Light-Dimmer with variable delay, Power Amplifier, SPST Solid State Relay, etc.
advanced search >> view cart >> checkout >> amount in cart: $0.00 
