Si15NeUdMC1-30V-20A The Si15NeUdMC1-30V-20A is a 30V 20A, networkable, microprocessor based, high-power, Unidirectional, Motor Controller that uses a single (9V to 30V at 0 to 20A) DC power supply to control the speed of a DC motor in forward direction. An onboard microprocessor generates a 5kHz or 20kHz PWM carrier signal, controls the load-power (or motor speed), controls the load-current rate (or motor acceleration and deceleration), updates the 4-Digit Display, monitors the user inputs and controls the RS232 Network Port.
Price: $139.00
Si15NeUdPC1-30V-20A The Si15NeUdPC1-30V-20A is a 30V 20A, networkable, microprocessor based, high-power, Unidirectional, Power Controller that uses a single (9V to 30V at 0 to 20A) DC power supply to control the average current to load (or DC motor) in one direction. An onboard microprocessor generates a 5kHz or 20kHz PWM carrier signal, controls the load-power (or motor speed), controls the load-current rate (or motor acceleration and deceleration), updates the 4-Digit Display, monitors the user inputs and controls the RS232 Network Port. The PWM carrier frequency is user selectable by the jumper J2, 5kHz when J2 is short and 20kHz when open.
Price: $139.00
Motor Controllers with Proximity Sensor
Si5HyUdMCPS1-30V-20A The Si5HyUdMCPS1-30V-20A is a 30V 20A, Single, open-loop, microprocessor based, Hybrid, Unidirectional, Motor-Controller board with an Integrated Heat Sink that uses pulse-width modulation (PWM) for efficient control of a load (or brush type DC motor) in the 0 to 600W power range in 5W steps. The desired motor speed (or load current) is set by an external analog voltage (0 to 5V range) but the motor motion is initiated by a reflective infra-red (IR) proximity sensor which keeps the motor turning long as an object is in the view of the sensor. This sensor has an approximate range from 0 to 0.2”.
Price: $119.00
Si5HyUdMCPS1-50V-20A The Si5HyUdMCPS1-50V-20A is a 50V 20A, Single, open-loop, microprocessor based, Hybrid, Unidirectional, Motor-Controller board with an Integrated Heat Sink that uses pulse-width modulation (PWM) for efficient control of a load (or brush type DC motor) in the 0 to 1000W power range in 8.5W steps. The desired motor speed (or load current) is set by an external analog voltage (0 to 5V range) but the motor motion is initiated by a reflective infra-red (IR) proximity sensor which keeps the motor turning long as an object is in the view of the sensor. This sensor has an approximate range from 0 to 0.2”.
Price: $129.00
Si6HyUdMCPS1-30V The Si6HyUdMCPS1-30V is a single, open-loop, Hybrid, Unidirectional, Motor-Controller with one Infra Red (IR) Proximity Sensor Input for Motor Start function; one Analog Input (0 to 5V) for Set-Speed adjustment; one 30V, 20A MOSFET Output; and one 20kHz Pulse-Width Modulator (PWM). This board efficiently controls the power flow to an isolated DC Load (or Motor) from 0 to 600W in 4W steps. The user can choose between slow or fast motor acceleration/deceleration modes by short-circuiting or open-circuiting the pins labeled J1M.
Price: $119.00
Si6HyUdMCPS1-50V The Si6HyUdMCPS1-50V is a single, open-loop, Hybrid, Unidirectional Motor-Speed Controller with one Infra Red (IR) Proximity Sensor Input for Motor Start function; one Analog Input (0 to 5V) for Set-Speed adjustment; one 50V, 20A MOSFET Output; one 20kHz Pulse-Width Modulator (PWM). This board is efficiently controls the power flow to an isolated DC Load (or Motor) from 0 to 1000W in 6.6W steps. The user can choose between slow or fast motor acceleration/deceleration modes by short-circuiting or open-circuiting the pins labeled J1M.
Price: $129.00
Motor Controllers with Voltage Regulation
Si7HyVRUdMC1-30V The Si7HyVRUdMC1-30V-20A is a single, microprocessor based, Voltage-Regulated, Unidirectional, Motor-Controller board that uses pulse-width modulation (PWM) for efficient unidirectional speed control of a brush type DC motors (or loads) in open-loop mode, with a 0 to 600W power range in 4W steps.
Price: $119.00
Si7HyVRUdMC1-50V The Si7HyVRUdMC1-50V-20A is a single, microprocessor based, Hybrid, Voltage-Regulated, Unidirectional, Motor-Controller board that uses pulse-width modulation (PWM) for efficient unidirectional speed control of a brush type DC motors (or loads) in open-loop modes, with a 0 to 1000W power range, in 6.6W steps.
advanced search >> view cart >> checkout >> amount in cart: $0.00 
