Si24DTsens-12B The Si24DTsens-12B is a small size, 12-Bit Digital Temperature Sensor Assembly, used as a plug-in accessory with all Signal Consulting, LLC Controller Boards that requires high resolution (0.0625 degree C) temperature measurement. This sensor measures temperature from -55 degree C to +125 degree C with 1/2 degree C accuracy. This sensor uses a unique “1-wire interface” that can operate in parasite power mode. In this mode, it requires only 2-conductors for reliable remote (long as 20 meters) temperature sensing.
Price: $39.00
Si24LCD2L20CH The Si24LCD2L20CH accessory is used with all Signal boards with LCD port. This 2 line by 20 character display with back lighting uses the Hitachi HD44780 interface standard. A 14-pin male connector and an 8? long ribbon cable is used.
Price: $59.00
Si24LCD4L20CH The Si24LCD4L20CH accessory is used with all Signal boards with LCD port. This 4 line by 20 character display with back lighting uses the Hitachi HD44780 interface standard. A 14-pin male connector and an 8? long ribbon-cable is used.
Price: $79.00
Si24PB2-CH3 The Si24PB2-CH3 consist of two normally-open push-button with 12? leads and with a small 3-Pin Molex 22-01-3037 Polarized FN Connector. This accessory is used with all Signal Digital controllers for Up and Down temperature or motor-speed settings.
Price: $29.00
Si24PB2-MC3 The Si24PB2-MC3 consist of two normally-open push-button with 12 inch long leads and with a small 3-Pin Molex 22-01-3037 Polarized FN Connector. This accessory is used with all Signal Digital controllers for Up and Down temperature or motor-speed settings.
Price: $29.00
Si24Pot1-5kMC3 The Si24Pot1-5kMC3 accessory is a 1-turn, linear tapered, 5k Ohm potentiometer with 12? long connecting wire (pigtail) and with a small 3-Pin Molex 22-01-3037 Polarized FN Connector. This accessory is used with all Signal Hybrid controllers.
Price: $16.00
Si4Display Si4Display is a 4-Digit LED display module with RS232 interface. It can be controlled with serial command from any host controller with RS232 or TTL serial port (UART). The Si4Display is cascadable to form a display chain that can be controlled with single pin from a host controller or PC. Each Si4Display can be programmed with unique address so that each can be individually controlled. A 12 inch cable with connectors is included with this unit.
Price: $59.00
Si500APHS1 The Si500APHS1 Aluminum Plate Heat-Sink with dimensions of 3.0" x 3.9"x 0.042" is used with Si2, Si4, Si5, Si6 and Si7 PC boards, when operating at 8A current level.
advanced search >> view cart >> checkout >> amount in cart: $0.00 
