Si1000APHS1 The Si1000APHS1 Aluminum Plate Heat-Sink with dimensions of 4.0" x 6.0" x 0.065" is used with Si5, Si6, Si7, Si9, Si14, Si21, and Si24 PC boards, when operating at 15A current level.
Price: $14.00
Si14LCD2L16CH The Si14LCD2L16CH is a 2 line by 16 character, transflective LCD display module with back lighting that uses a 5V, 9600 bps RS232 standard. A 12 inches long, cable with two 3-pin female connectors is included for rapid connectivity.
Price: $59.00
Si15PB2-MC3 The Si15PB2-MC3 consist of two normally-open push-button with 12 inch long leads and with a small 3-Pin Molex 22-01-3037 Polarized FN Connector. This accessory is used with all Signal Digital controllers for Up and Down temperature or motor-speed settings.
Price: $29.00
Si15WFHS1 Si15WFHS1 is a 3.0” x 4.1” x 1.0” Black Anodized 15W Finned Heat-Sink. This heat-sink is used with the Si50 products to remove and dissipate the internal heat generated by the controller board.
Price: $23.00
Si18DTsens The Si18DTsens is a small size, 9-Bit Digital Temperature Sensor Assembly, used as a plug-in accessory with all Signal Consulting, LLC Controller Boards that requires medium resolution (1/2 degree C) temperature measurement. This sensor measures temperature from -55 degree C to +125 degree C with 1/2 degree C accuracy.
This sensor uses a unique “1-wire interface” that can operate in parasite power mode. In this mode, it requires only 2-conductors for reliable remote (long as 20 meters) temperature sensing.
Price: $29.00
Si18DTsens-9B The Si18DTsens-9B is a small size, 9-Bit Digital Temperature Sensor Assembly, used as a plug-in accessory with all Signal Consulting, LLC Controller Boards that requires medium resolution (1/2 degree C) temperature measurement. This sensor measures temperature from -55 degree C to +125 degree C with 1/2 degree C accuracy. This sensor uses a unique “1-wire interface” that can operate in parasite power mode. In this mode, it requires only 2-conductors for reliable remote (long as 20 meters) temperature sensing.
Price: $29.00
Si18LEDhc The Si18LEDhc accessory is a 3mm OD Red/Green bicolor LED Indicator light used with the Si18HC1x Hybrid-Controller Board or with the Si18DC1x Digital-Controller Board in temperature control applications.
Price: $14.00
Si18Pot2PB2MC8 The Si18Pot2PB2MC8 accessory consists of two 10k Ohm potentiometer (P1, P2) and two push buttons PB-black, PB-red) with 12 leads and 8-pin connector. This accessory is used with the Si18HC1x Hybrid-Controller Board (Plugs into CN2/ExK port).
advanced search >> view cart >> checkout >> amount in cart: $0.00 
